Ideas

A spaceplane launched from an electromagnetic rail

A reusable two-stage spaceplane that leaves a 3.4 km maglev track at 270 m/s. The rail's real job turns out to be deleting the takeoff wing and the landing gear.

DoneStarted

The brief: design a reusable spaceplane, single- or multi-stage to orbit, whose takeoff is assisted by an electromagnetic rail. The model flies each candidate to orbit on a steered trajectory and resizes it until the mass closes.

What closes

Single-stage didn’t close. A two-stage vehicle did:

  • a winged LOX/methane booster leaves a 3.4 km track at 270 m/s on a maglev sled;
  • it carries a LOX/hydrogen orbiter on its back to Mach 12 and 88 km, then flies back to the runway on turbofans;
  • the orbiter puts 10 t into a 200 km orbit and lands on the same runway.

The whole stack is 523 t. The track stores 30 GJ, peaks at 5.4 GW for 11 seconds, and would cost about $1.5 billion.

What the rail buys

The same two stages taking off on their own wheels would weigh 826 t, 58% more. That is the rail’s real contribution: it removes the takeoff wing and the undercarriage, the two things that killed HOTOL and worried Skylon. Against a vertical launch from a pad the saving is smaller, about 12% of the stack.