Projects

Tidewing

A car-portable autonomous sailboat for San Francisco Bay — 3D-printed hulls, a rigid wingsail, and an ArduPilot autopilot.

BuildingStarted Updated

Tidewing is a small robot sailboat that fits in a car, launches from a beach on the Bay, and sails itself. The hulls and fittings are printed on a Bambu P1S, the lids are cut on a Carvera Air, it steers with ArduPilot Rover, and the electronics are ordinary flying-wing RC gear.

The boats

  • Tidewing 1.2: the first design. A 7.2 kg keelboat: slow, about 2.5 kt at hull speed, but it rights itself and it is simple.
  • Tidewing F: the current design. A 4.5 kg foiling trimaran on two main T-foils, whose ride height is controlled actively in heave and roll. In simulation it lifts onto its foils from about 10 kt of wind, with a short motor assist, and flies at 4–9 kt.
  • Tidewing F-E: a motor-only pathfinder for the F. It proves the hull, the electronics and the autopilot before a sail goes on. It is built, and it hasn’t floated yet.

Model first

Each design was worked out in software before anything was printed: a velocity prediction program for speed and takeoff, a six-degree-of-freedom simulator in random waves with a replica of ArduPilot’s sailboat controller, and parametric CAD that regenerates every printed part from a single file of dimensions. Test missions and geofences for the first sailing site (Coyote Point, San Mateo) are generated from OpenStreetMap.

Where it’s going

The work has spun off a set of bigger what-ifs. One is Tidewing X, an ocean-going version that would explore the Pacific; another asks what it would take for a robot to beat the San Francisco–Hawaii record.

Next: put the F-E in the water.