Projects

NERO robot

A robot arm on a work-table base with a stereo-camera frame and a pan/tilt head, built to collect manipulation data with scripts.

BuildingStarted Updated

The robot sits on a 24 × 36 in work table. An AgileX NERO 7-DoF arm is mounted on its front edge, reaching out over a second, identical table where the work happens. There’s one arm today, and the frame has room for a second.

Seeing the work

Depth cameras watch the work from several angles:

  • two Intel RealSense D455s up behind the arms, their views crossing over the work table;
  • one on a motorised pan/tilt head between the arms, for a first-person view;
  • a D405 on each wrist.

The camera frame is wood: ripped boards, a cut list and drilling plan made to read on a phone, plus a few printed brackets. Every hole is in the plan, and the build guide has a picture for each step.

Data collection

The goal is manipulation data collected by a script. Two trays inside the arm’s reach let the script reset the scene itself, and the cell also has a mat, lighting, an e-stop and a calibration routine.

The same rig led to a bigger question: would a restaurant actually want a prep robot?